DESCARGO DE RESPONSABILIDAD: NOS ESFORZAMOS POR PROPORCIONAR IMÁGENES Y ESPECIFICACIONES PRECISAS DEL PRODUCTO. LOS FABRICANTES PUEDEN ACTUALIZAR LA APARIENCIA, LAS CARACTERÍSTICAS O LAS ESPECIFICACIONES DEL PRODUCTO SIN PREVIO AVISO. SI TIENE ALGUNA PREGUNTA SOBRE LA COMPATIBILIDAD, PÓNGASE EN CONTACTO CON NOSOTROS; ESTAREMOS ENCANTADOS DE AYUDARLE A ASEGURARSE DE QUE PIDE EL PRODUCTO CORRECTO.

Model: Jandy AquaLink RS P6 (RS-P6, System Level RS 6)
Part Number/SKU: IQ906-P-PC-SWC
Application: Pool Only — single body of water
System Capacity: Filter pump, heater and 5 auxiliary circuits
Panel Type: 6614AP-LG PureLink Power Center with integrated Sub-Panel
Salt System: Included — PureLink chlorinator control built into the power center
Salt Cell: Jandy AquaPure PLC1400, rated to 40,000 gallons
Actuators Included: None — supports up to 4 Jandy Valve Actuators
Remote Control: iAquaLink app via included iQ30-A Web-Connect Device

The Jandy IQ906-P-PC-SWC AquaLink RS P6 Pool Only Automation Kit is a complete, single-body control system for pools without a spa. It manages the filter pump, the heater and five additional auxiliary circuits from one panel, covering the equipment most residential pools actually run — pump speeds, heater setpoints, pool lighting, a cleaner booster pump and a water feature. Because this is the pool-only configuration, it controls one body of water rather than switching flow between a pool and spa.

The kit ships with Jandy's 6614AP-LG PureLink Power Center, which combines the automation enclosure with an integrated electrical sub-panel and the salt chlorinator control electronics in a single housing. That sub-panel is rated for four 3HP relays as supplied and up to eight installed, so there is headroom to add circuits later without a second enclosure. Salt chlorination is genuinely part of this kit, not merely supported: the AquaPure PLC1400 cell is included in the box, rated for pools up to 40,000 gallons and producing 1.25 lb of chlorine per 24 hours. Note that no valve actuators ship with this kit — a pool-only system has no intake and return diverter pair to drive. The board accepts up to four actuators (cleaner, intake, return and solar) if you add them.

Control runs through the iQ30-A iAquaLink 3.0 Web-Connect Device, which is included. It carries a wired/Wi-Fi switch so it can join the home network either way, and it connects to the power center board over RS485. From the iAquaLink app you get scheduling, remote temperature control, equipment status and diagnostics from anywhere with a connection, plus Siri Shortcut and Alexa Skill support and integration with home automation systems. AquaLink RS also supports up to 16 variable-speed pumps and solar heat control, and the system can be expanded with up to three auxiliary power centers wired in series or parallel from the primary.

Key Features

• Pool-only single-body automation for filter pump, heater and 5 auxiliary circuits
• 6614AP-LG PureLink Power Center with integrated electrical sub-panel
• AquaPure PLC1400 salt cell included — rated to 40,000 gallons
• Relay capacity of four 3HP relays supplied, expandable to eight
• iQ30-A iAquaLink Web-Connect Device included for app control
• Wi-Fi or wired Ethernet connection, selectable on the device
• Variable-speed pump integration and heater control
• Scheduling, remote access and diagnostics through the iAquaLink app
• Expandable to three auxiliary power centers and four valve actuators

Specifications

What's Included

• AquaLink RS system board, pool-only RS-P6 configuration
• 6614AP-LG PureLink Power Center with integrated sub-panel
• AquaPure PLC1400 salt chlorinator cell with unions, flow/temp/salinity sensor and DC power cord
• Air and water temperature sensors
• 3HP relays
• iQ30-A iAquaLink 3.0 Web-Connect Device
• Not included: valve actuators, spa-side remotes, in-house remotes, OneTouch and All-Button control panels

This configuration suits a pool-only installation where salt chlorination is wanted from day one and the owner expects app control as standard. Because the sub-panel and chlorinator electronics are built into one enclosure, it keeps the equipment pad tidier than assembling the same capability from separate parts — and the spare relay capacity means adding a water feature or second light circuit later doesn't require new hardware.

Learn more at Jandy:
https://www.jandy.com/en/products/pool-automation/automation-system/aqualink-rs-automation